Load data for .219 Zipper + .224 | 45gr | Sellier & Bellot FMJ

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 45gr \| Sellier & Bellot FMJ
Manufacturer SKU:	2901
Bullet Weight:	45gr \| 2.9g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.567" \| 14.4mm
Caliber:	.219 Zipper load data
Case Length (l3):	1.933" \| 49.1mm
Cartridge Length (C.O.L.):	2.226" \| 56.5mm
Seated Depth:	0.274" \| 7.0mm
Shank Seated Depth:	0.274" \| 7.0mm
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	41336 psi \| 2850 bar
LID:	LID_B7200_C58
Last updated:	2025-01-01

Load data for 42 loads in caliber .219 Zipper with .224 | 45gr | Sellier & Bellot FMJ bullet and 21 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	84%	36927	89%	**99	94%
Accurate 2015	<<locked>>	89%	36637	89%	**73	96%
Accurate 2495	<<locked>>	95%	36637	89%	**55	96%
Alliant AR-Comp	<<locked>>	93%	36883	89%	**55	98%
Alliant Reloder-10x	<<locked>>	86%	36521	88%	**99	97%
[Hodgdon H322]*	<<locked>>	89%	36434	88%	**82	93%
[Hodgdon H335]*	<<locked>>	84%	36274	88%	**66	92%
Hodgdon TrailBoss	<<locked>>	97%	30095	73%	**01	100%
[IMR 3031]*	<<locked>>	97%	35926	87%	**35	94%
IMR 4198	<<locked>>	85%	37188	90%	**69	98%
[Norma 202]*	<<locked>>	94%	37159	90%	**99	93%
ReloadSwiss RS 14	<<locked>>	97%	29791	72%	**47	100%
[Rottweil R 901]*	<<locked>>	90%	36201	88%	**36	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	91%	36869	89%	**94	92%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	35389	86%	**58	93%
[Somchem S335]*	<<locked>>	92%	36506	88%	**10	94%
Vihtavuori N130	<<locked>>	88%	36376	88%	**23	97%
Vihtavuori N133	<<locked>>	94%	36869	89%	**27	96%
[Vihtavuori N135]*	<<locked>>	96%	29196	71%	**79	92%
[Vihtavuori N140]*	<<locked>>	96%	37028	90%	**56	93%
[Vihtavuori N540]*	<<locked>>	96%	36492	88%	**63	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	33228	80%	**91	92%
[Accurate 2015]*	<<locked>>	81%	28166	68%	**20	92%
[Accurate 2495]*	<<locked>>	85%	25440	62%	**20	90%
[Alliant AR-Comp]*	<<locked>>	81%	24671	60%	**54	92%
Alliant Reloder-10x	<<locked>>	81%	31299	76%	**48	95%
[Hodgdon H322]*	<<locked>>	83%	30342	73%	**05	90%
[Hodgdon H335]*	<<locked>>	81%	32750	79%	**61	90%
Hodgdon TrailBoss	<<locked>>	81%	23438	57%	**21	100%
[IMR 3031]*	<<locked>>	90%	28935	70%	**99	90%
IMR 4198	<<locked>>	81%	33605	81%	**68	97%
[Norma 202]*	<<locked>>	90%	32256	78%	**58	90%
ReloadSwiss RS 14	<<locked>>	81%	23235	56%	**67	100%
[Rottweil R 901]*	<<locked>>	88%	33794	82%	**74	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	32924	80%	**89	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	30661	74%	**17	91%
[Somchem S335]*	<<locked>>	86%	30676	74%	**40	91%
[Vihtavuori N130]*	<<locked>>	81%	29399	71%	**17	94%
[Vihtavuori N133]*	<<locked>>	84%	26571	64%	**22	90%
[Vihtavuori N135]*	<<locked>>	94%	27151	66%	**00	90%
[Vihtavuori N140]*	<<locked>>	92%	32213	78%	**22	90%
[Vihtavuori N540]*	<<locked>>	93%	33127	80%	**68	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data